Scales disproportionate size in Autocad

We can enlarge the object in autocad with a disproportionately high magnification.

As an example we will zoom 4x its length but its width we zoom 1.5 x.

With the help block all of these features were easy and quick.

Once we determine the block in the figure, we can insert a reference block in the picture many times as necessary.

Use this method to create a block definition block cepat.Setiap include the name of the block, one or more objects,

coordinate value of the basic points that will be used to enter the block, and any associated attribute data.

Base is used as a reference point for positioning the block when we enter it.

For example, we determine that the basic point in the lower left corner of the object in the block.

Then, when we enter the block, we asked for the insertion point.

Block basis point is at the insertion point that we have set.

To create an object that we want to use the block definition.

On the Draw menu, click Make Block.

 









 

Klik Select Objects.

In the Block Definition dialog box, enter the name of the block in the Name box.

Under Objects, select Convert to Block.

If we want the original object used to create the block definition to remain in our image,

make sure the Delete option is not selected. If this option is selected, the original object is removed from the image.

If necessary, we can use the OOPS to restore it.

Click the Select Objects.

Use pointing to select objects that will be included in the definition block. Press ENTER to complete the selection object.

In the Block Definition dialog box under Base Point, specify the insertion point block using one of these methods:

Click the Pick Point to determine the point of using a pointing device.

Enter X, Y, Z coordinates of the point value.

In the Description box, enter the description for the block definition.

Click OK.

Share :