Drawing limits

We should always be used to save the file after work every 10 to 15 minutes to avoid losing work if the computer system crashes. Saving images for the first time different from the next store because we had to name pictures.

To save an image, click Save on the Quick Access toolbar. If we

save images for the first time, select Save As dialog box.

To save a file, type a file name in the File Name text box and click Save to save the file

The next step to do the Drawing Limits Set up a function for setting the boundary area of ​​drawing as a visual reference that marks the work area, and defines the area to be printed.

Here we will create a drawing area using landscape to A3 paper size 420 x 297mm

Steps we have to do is:

Display the menu bar first

Click the small arrow beside Drafting & Annotation> Show Menu Bar

From the Menu Bar select format> drawing limits

or:

Type in the command prompt: Limits

Press enter, text appears in the command promt

Reset Model space limits: press enter

Specify the lower left corner or [ON / OFF] <0.00,0.00>: press enter to accept the standard coordinates <0.00,0.00>

Specify upper right corner <300.00,100.00>: type the numbers 420.297, press enter

Share :