Creating a Line to form the workpiece

At the start of drawing in AutoCAD in general, in determining the point

we are faced with two choices of reference that is based on the coordinate axes are already

set and a reference point based on the position of the previous dimension.

A. Reference point based on the coordinate axes that have been defined (Absolute

Coordinate).

At the time of drawing based on the coordinate axes, Dynamic Input

Enable (F12).

Placing UCS (as the coordinate axes) on the monitor screen area can be

done by pressing the Tool Box or type in UCS

Type "L" on the monitor screen or command> Press enter

Or it could be through a tool box or via Menu Draw

Command: Specify first point _line (Specify the first point): 37.0

Specify next point or [Undo] (Specify next point): 70.5,0

Specify next point or [Undo]: 70.5,135

Specify next point or [Close / Undo]: 37.135

Specify next point or [Close / Undo]: 0,113.6

Specify next point or [Close / Undo]: 0.37

Specify next point or [Close / Undo]: c> Press enter

Share :